Kitchen remodel cost in Grand Rapids, MI

Remodeled kitchen $75 to $250/sf; average remodel $14,600 to $41,300.

A typical kitchen remodel in Grand Rapids, MI is about $30,010, including a permit fee of $310.20.

What we assumed

We price Kitchen remodel in Grand Rapids, MI at 200 sf affected area.

When a published schedule is a valuation formula, the documented assumed valuation is $35,000 typical ($15,000 low, $75,000 high); not a city-assessed value. 2026 remodel $14.6k–$41.3k; high = larger gut.

The official typical permit fee is $310.20. Full detail is in the calculation note on this page.

Questions about this estimate

How much does kitchen remodel cost in Grand Rapids, MI?

Typical all-in is about $30,010. The official local permit fee of $310.20 ($285.20 building + $25 zoning) is included in the all-in.

Is a permit required for Kitchen remodel in Grand Rapids, MI?

Yes. City of Grand Rapids Development Center / Building Inspections requires a permit for a typical Kitchen remodel in Grand Rapids, MI. The typical listed fee is $310.20. City of Grand Rapids.

What is included in this Kitchen remodel estimate for Grand Rapids, MI?

The estimate is labor adjusted for local wages in Grand Rapids, MI, plus materials at the national figure, at the typical size in the table above. The official typical permit fee of $310.20 is included in the all-in typical.

Why might the Grand Rapids permit fee differ from this typical figure?

The official Grand Rapids, MI fee comes from City of Grand Rapids FY2027 fee schedule (building inspections, effective July 1, 2026) (valuation). City of Grand Rapids FY2027 fee schedule (building inspections, effective July 1, 2026). Site conditions, extras not in the typical row, and schedule updates can change what you actually pay. Verify with City of Grand Rapids Development Center / Building Inspections.

How is the typical permit fee calculated for Kitchen remodel in Grand Rapids, MI?

The official typical permit fee is $310.20. Full detail is in the calculation note on this page.

What project value is this Kitchen remodel permit fee based on in Grand Rapids, MI?

Project values used only for the permit formula (not your total cost): low $15,000, typical $35,000, high $75,000.

Are electrical, plumbing, or other trade permits included in this Kitchen remodel typical for Grand Rapids, MI?

Trade permits (electrical, plumbing, mechanical) can be separate from the building permit, and those trade permits are not computed in these totals.

How much does a kitchen remodel cost for 150, 200, or 400 sq ft in Grand Rapids?

Size on this page is kitchen room area. The typical job is 200 sq ft of affected area. The cost-by-size rows are 150 sq ft, 200 sq ft, and 400 sq ft. The calculator prices the remodel per square foot, and 200 is inside the allowed range of 80 to 500, so these figures are that same scale. At 200 sq ft in Grand Rapids, MI the all-in is $15,024 low, $30,010 typical, and $50,082 high. Those all-in figures add the rounded permit for the valuation bands on this page. The permit fees are $174.20, $310.20, and $582.20. The cost table rounds each to the nearest dollar before adding it, so the all-in uses $174 on the low, $310 on the typical, and $582 on the high. The low permit is the fee at a $15,000 valuation, and the high permit is the fee at a $75,000 valuation. The permit is a valuation-based building permit plus a $25 zoning permit, so it is not rescaled when the kitchen size changes, and it is not a new fee for 200 sq ft. The other table rows are 150 sq ft at $22,585 typical and 400 sq ft at $59,710 typical. The valuations used for the permit are $15,000, $35,000, and $75,000. At $35,000 the building permit is $54 + $6.80 x 34 = $285.20, then $25 zoning makes $310.20. Job cost is adjusted for local wages using the BLS construction-and-extraction mean of $30.15 per hour for the Grand Rapids-Wyoming-Kentwood, MI metro (May 2025), labor wage multiplier 0.960, applied to the official 25% labor share. The permit line is not adjusted for local wages.

How much does a kitchen remodel cost per square foot in Grand Rapids?

Cost per square foot on this page is the all-in typical divided by the kitchen square feet on that row. The square feet are room area, and the typical row is 200 sq ft of affected area. The cost-by-size rows are 150 sq ft, 200 sq ft, and 400 sq ft. The typical permit fee is $310.20. The cost-by-size table shows that fee on each of those rows, because this permit is valuation-based and is not rescaled when the kitchen size changes. At 200 sq ft in Grand Rapids, MI the all-in typical is $30,010, which is $150.05 per sq ft after rounding to the nearest dollar. At 150 sq ft the all-in typical is $22,585, or $150.57 per sq ft. At 400 sq ft the all-in typical is $59,710, or $149.28 per sq ft. Those per-square-foot figures are that division of the row. They are not a separate published rate.

Is $50,000 too much for a kitchen remodel in Grand Rapids?

At the model's typical 200 sq ft kitchen in Grand Rapids, MI, the all-in is $15,024 low, $30,010 typical, and $50,082 high. $50,000 is above that typical of $30,010. Published national kitchen prices run $75 to $250 per sq ft for a remodel, with an average remodel of $14,600 to $41,300; a new-from-scratch kitchen, a different job, runs around $65,000. $50,000 is above that $41,300 remodel high and below that $65,000 scratch-kitchen figure. Wage-indexed, the high at 200 sq ft in Grand Rapids, MI is $50,082. $50,000 is below that adjusted for local wages high and above the typical. On the typical path the same scale first reaches $50,000 at 340 sq ft ($50,800 typical). The typical permit on this page is $310.20 at a $35,000 valuation. The low is $174.20 at $15,000 and the high is $582.20 at $75,000. $50,000 sits between the typical valuation and the high valuation, so this page does not list a separate permit fee for a $50,000 project value. The all-in figures add the rounded typical permit of $310. They do not look up a new fee at $50,000.

Do I need a permit for a kitchen remodel in Grand Rapids?

Yes. A permit is required for a typical kitchen remodel in Grand Rapids, MI. City of Grand Rapids Development Center / Building Inspections is the office, and the typical fee is $310.20. The cited source is City of Grand Rapids FY2027 fee schedule (building inspections, effective July 1, 2026), retrieved 2026-10-07. This is the City of Grand Rapids, not Kentwood or Wyoming, and not Kent County. The total is a valuation-based building permit plus a 1-2 family zoning permit of $25. At a $35,000 valuation, the first $1,000 is in the $54 base and 34 additional thousands are at $6.80, so $54 + $6.80 x 34 = $285.20, then $285.20 + $25 = $310.20. A $15,000 valuation is $174.20 and a $75,000 valuation is $582.20. The plan-review column on the FY2027 table applies to commercial totals only, so it is not added here. Trade permits (electrical, plumbing, mechanical) can be separate and are not computed in these totals. Source: City of Grand Rapids FY2027 fee schedule (building inspections, effective July 1, 2026) (https://www.grandrapidsmi.gov/media/4lzl0erl/planning-design-and-development-fee-schedule-fy2027.pdf).

How is the $310.20 kitchen permit fee calculated in Grand Rapids?

The $310.20 typical fee is the valuation-based building permit plus the 1-2 family zoning permit at a $35,000 job. The schedule is the City of Grand Rapids FY2027 fee schedule (building inspections, effective July 1, 2026), retrieved 2026-10-07, from the City of Grand Rapids Development Center / Building Inspections. Step 1: the first $1,000 of valuation is inside the $54 base. Step 2: the remaining valuation is 34 additional thousands at $6.80. Step 3: $54 + $6.80 x 34 = $285.20 for the building permit. Step 4: add the zoning permit, $285.20 + $25 = $310.20. Both lines are included. The building permit is $285.20, with the first $1,000 in the $54 base, and the zoning permit is $25. The cost table rounds $310.20 to $310 before adding it to the all-in estimate. The plan-review column applies to commercial totals only and is not added. Trade permits (electrical, plumbing, mechanical) can be separate and are not in this $310.20 total.

Does a bigger job budget cost more to permit a kitchen remodel in Grand Rapids?

Yes. A bigger job budget costs more to permit because the building permit is valuation-based. The same formula is used at three valuations on this page. At $15,000, the first $1,000 is in the $54 base and 14 additional thousands remain, so $54 + $6.80 x 14 = $149.20, then $149.20 + $25 zoning = $174.20. At $35,000, 34 additional thousands give $54 + $6.80 x 34 = $285.20, then $285.20 + $25 = $310.20. At $75,000, 74 additional thousands give $54 + $6.80 x 74 = $557.20, then $557.20 + $25 = $582.20. The $582.20 high is the fee at $75,000. It is not added on top of the $310.20 typical. Kitchen square footage does not drive these three totals. The cost table rounds them to $174, $310, and $582.

Does kitchen square footage change the permit fee in Grand Rapids?

No. Kitchen square footage does not change the permit fee. The fee is valuation-based, and kitchen floor area is not the fee basis. The typical job is 200 sq ft, and the cost-by-size rows are 150, 200, and 400 sq ft. Each of those rows adds the same typical permit, $310.20 rounded to $310, because the permit is not rescaled when the kitchen size changes. At 150 sq ft the all-in typical is $22,585. At 200 sq ft it is $30,010. At 400 sq ft it is $59,710. The job cost changes with the room size. The permit does not. The permit does change when the job valuation changes: $174.20 at $15,000, $310.20 at $35,000, and $582.20 at $75,000.

What is the $25 zoning permit for a kitchen remodel in Grand Rapids?

The $25 zoning permit is the City of Grand Rapids 1-2 family zoning fee. It is added after the valuation-based building permit, and it is included in each total on this page. At the typical $35,000 valuation the building permit is $285.20 and zoning is $25, so $285.20 + $25 = $310.20. The same $25 is added at $15,000 ($149.20 + $25 = $174.20) and at $75,000 ($557.20 + $25 = $582.20). It does not change with kitchen square footage. It is not a separate electrical, plumbing, or mechanical trade permit, and those trade permits are not computed in these totals.