Building Permit Fees in Riverside, CA (2026)

City of Riverside Community and Economic Development Department, Building and Safety Division is the permit office for Riverside, CA. The fee schedule year is 2026.

Updated Oct 7, 2026 · Fees checked Oct 7, 2026

Permit fees by job

Building permit fees in Riverside, CA by job, 2026
JobPermit feeHow it is calculatedOfficial source
Roof replacement

Typical $212.28

Range $183.26 to $242.08

Flat fee. Project value on this row: low $8,000, typical $12,000, high $22,000.

Full roof replacement calculation below

City of Riverside Building and Safety Fees (effective July 1, 2026)

Retrieved Oct 7, 2026

HVAC replacement

Typical $154.70

Range $98.51 to $188.86

Typical equipment $98 + issuance $41 + GPM/tech/SMIP/CBSC = $154.70. Low furnace-only $98.51. High furnace+$78 AC $188.86. Documented 3-ton (36,000 BTU).

Full HVAC replacement calculation below

City of Riverside Building and Safety Fees (effective July 1, 2026)

Retrieved Oct 7, 2026

Deck

Typical $440.28

Range $439.76 to $441.22

Typical: $348 + $41 + GPM $34.80 + tech $13.92 + SMIP $1.56 + CBSC $1 = $440.28. Low $439.76; high $441.22. Typical-job spec 16×20 = 320 sf.

Full deck calculation below

City of Riverside Building and Safety Fees (effective July 1, 2026)

Retrieved Oct 7, 2026

Kitchen remodel

Typical $467.07

Range $358.59 to $892.79

Typical 200 sf: $368 + $41 + GPM $36.80 + tech $14.72 + SMIP $4.55 + CBSC $2 = $467.07. Low 150 sf $358.59; high 400 sf $892.79.

Full kitchen remodel calculation below

City of Riverside Building and Safety Fees (effective July 1, 2026)

Retrieved Oct 7, 2026

How each fee is calculated

Roof replacement

Fee basis: Flat fee.

Project value on this row: low $8,000, typical $12,000, high $22,000.

City of Riverside Building and Safety Fees (effective July 1, 2026), retrieved Oct 7, 2026. These totals are for the City of Riverside, not Riverside County or neighboring cities.

A tear-off and re-roof uses an area-based schedule, and a permit is required. The official fee band is $183.26 low, $212.28 typical, and $242.08 high.

The official typical project value is $12,000. Listed assumed valuations are $8,000 low, $12,000 typical, and $22,000 high.

Roof area, not job valuation, drives most of the fee. Valuation only moves SMIP and CA Building Standards.

The reroof line is $61.50 + $61.50 for the first 1,000 sf ($123.00), plus $12.50 + $12.50 ($25.00) per additional 500 sf or portion. Permit issuance is $41.

General Plan Maintenance (GPM) is 10% of the reroof line. The technology fee is 4% of the reroof line.

SMIP is 0.00013 x valuation. CA Building Standards (CBSC) is $1 per $25,000 of valuation or portion.

Walk the typical first. At 1,500 sf and $12,000, one extra 500 sf portion makes the reroof line $148.00.

GPM 10% of $148.00 is $14.80. Technology 4% of $148.00 is $5.92.

SMIP 0.00013 x $12,000 is $1.56. CBSC is $1.

So reroof $148.00 + issuance $41 + GPM $14.80 + tech $5.92 + SMIP $1.56 + CBSC $1 = $212.28.

  • Low 1,000 sf and $8,000: reroof $61.50 + $61.50 = $123.00, with no added portion.

GPM 10% is $12.30. Technology 4% is $4.92.

SMIP 0.00013 x $8,000 is $1.04. CBSC is $1.

So reroof $123.00 + issuance $41 + GPM $12.30 + tech $4.92 + SMIP $1.04 + CBSC $1 = $183.26.

  • High 1,800 sf and $22,000: the 800 sf above 1,000 counts as two 500-sf portions, so reroof $123.00 + $25.00 + $25.00 = $173.00.

GPM 10% is $17.30. Technology 4% is $6.92.

SMIP 0.00013 x $22,000 is $2.86. CBSC is $1, still one $25,000 portion.

So reroof $173.00 + issuance $41 + GPM $17.30 + tech $6.92 + SMIP $2.86 + CBSC $1 = $242.08. The $242.08 high is not added on top of the $212.28 typical.

Documented 1,000 / 1,500 / 1,800 sf are the official rows. The overlay path at $103 is not used.

Tear-off with new sheathing at $178 for the first 1,000 sf is not assumed, and those paths are not totaled. This note does not invent a fee beyond the official $183.26, $212.28, and $242.08 totals.

City of Riverside, not county. Overlay $103 path is not used; typical is tear-off & reroof. Tear-off with new sheathing $178 first 1,000 sf is not assumed.

City of Riverside Building and Safety Fees (effective July 1, 2026) Retrieved Oct 7, 2026.

HVAC replacement

Fee basis: Flat fee.

Project value on this row: $7,500.

Typical equipment $98 + issuance $41 + GPM/tech/SMIP/CBSC = $154.70. Low furnace-only $98.51.

High furnace+$78 AC $188.86. Documented 3-ton (36,000 BTU).

3-ton like-for-like split uses furnace $49 + 0–3 ton AC $49. High 5-ton uses the 3–50 ton AC line $78. Air-handler $49 is not stacked (like-for-like indoor coil with the furnace).

City of Riverside Building and Safety Fees (effective July 1, 2026) Retrieved Oct 7, 2026.

Deck

Fee basis: Flat fee.

Project value on this row: low $8,000, typical $12,000, high $19,200.

Typical: $348 + $41 + GPM $34.80 + tech $13.92 + SMIP $1.56 + CBSC $1 = $440.28.

  • Low $439.76; high $441.22.

Typical-job spec 16×20 = 320 sf.

All documented 200/320/400 sf decks are in the first 500 sf ($348). Additional $150 per 500 sf is not triggered.

City of Riverside Building and Safety Fees (effective July 1, 2026) Retrieved Oct 7, 2026.

Kitchen remodel

Fee basis: Per square foot.

Project value on this row: low $15,000, typical $35,000, high $75,000.

  • Typical 200 sf: $368 + $41 + GPM $36.80 + tech $14.72 + SMIP $4.55 + CBSC $2 = $467.07.
  • Low 150 sf $358.59; high 400 sf $892.79.

Home remodel R-3 100–500 sf table. Electrical/plumbing fixture lines are extra and not stacked. City of Riverside, not the county.

City of Riverside Building and Safety Fees (effective July 1, 2026) Retrieved Oct 7, 2026.

Questions about these permit fees

How much is a roof replacement permit in Riverside?

The typical permit fee is $212.28. The range is $183.26 to $242.08. Fee basis: Flat fee. Project value on this row: low $8,000, typical $12,000, high $22,000. Source: City of Riverside Building and Safety Fees (effective July 1, 2026). Retrieved Oct 7, 2026.

How much is an HVAC replacement permit in Riverside?

The typical permit fee is $154.70. The range is $98.51 to $188.86. Fee basis: Flat fee. Project value on this row: $7,500. Source: City of Riverside Building and Safety Fees (effective July 1, 2026). Retrieved Oct 7, 2026.

How much is a deck permit in Riverside?

The typical permit fee is $440.28. The range is $439.76 to $441.22. Fee basis: Flat fee. Project value on this row: low $8,000, typical $12,000, high $19,200. Source: City of Riverside Building and Safety Fees (effective July 1, 2026). Retrieved Oct 7, 2026.

How much is a kitchen remodel permit in Riverside?

The typical permit fee is $467.07. The range is $358.59 to $892.79. Fee basis: Per square foot. Project value on this row: low $15,000, typical $35,000, high $75,000. Source: City of Riverside Building and Safety Fees (effective July 1, 2026). Retrieved Oct 7, 2026.

Where do I apply for a building permit in Riverside?

Apply with City of Riverside Community and Economic Development Department, Building and Safety Division. The permit portal is https://riversideca.gov/cedd/building-safety/building-safety-services/permits.

Permit fees in other California cities

Related pages