CostInMyCity

Building Permit Fees in Fresno, CA (2026)

City of Fresno Planning and Development Department, Building & Safety is the permit office for Fresno, CA. The fee schedule year is 2027.

Updated Oct 7, 2026 · Fees checked Oct 7, 2026

Permit fees by job

Building permit fees in Fresno, CA by job, 2026
JobPermit feeHow it is calculatedOfficial source
Roof replacement

Typical $291.94

Range $258.01 to $291.94

Typical 1,500 sf = 15 squares: $102.72+$103.98+$30.07 = $236.77 + GP 12.83% + $23.79 + CBSC $1 = $291.94. Low 1,000 sf (10 squares) $258.01; high 1,800 sf still one additional 10-square block $291.94.

Full roof replacement calculation below

City of Fresno Master Fee Schedule (MFS Amendment #590), fees effective July 1, 2026 (FY27 CPI update)

Retrieved Oct 7, 2026

HVAC replacement

Typical $381.86

Range $256.06 to $582.58

Typical 3-ton (36,000 BTU) like-for-like split: FAU $177.89 + simple cooling $111.50 + issuance $27.08 = $316.47 then GP/tech/CBSC → $381.86. Low = FAU only $256.06. High = two complex mechanical items + cooling $582.58.

Full HVAC replacement calculation below

City of Fresno Master Fee Schedule (MFS Amendment #590), fees effective July 1, 2026 (FY27 CPI update)

Retrieved Oct 7, 2026

Deck

Typical $594.41

Range $594.41 to $1,082

Typical/low non-engineered: $238.02+$266.83 = $504.85 + GP/tech/CBSC = $594.41. High engineered: $670.22+$266.83 then surcharges = $1,082.06. Typical-job spec 16×20 = 320 sf.

Full deck calculation below

City of Fresno Master Fee Schedule (MFS Amendment #590), fees effective July 1, 2026 (FY27 CPI update)

Retrieved Oct 7, 2026

Kitchen remodel

Typical $835.71

Range $834.71 to $836.71

First 500 sf: $227.99+$489.83 = $717.82 + GP $92.10 + tech $23.79 + CBSC $2 = $835.71. Low $834.71 (CBSC $1); high $836.71 (CBSC $3). Typical-job spec 200 sf (low 150 / high 400). Earlier figures used the $1 CBSC tier at every band.

Full kitchen remodel calculation below

City of Fresno Master Fee Schedule (MFS Amendment #590), fees effective July 1, 2026 (FY27 CPI update)

Retrieved Oct 7, 2026

How each fee is calculated

Roof replacement

Fee basis: Flat fee.

Project value on this row: low $8,000, typical $12,000, high $22,000.

  • Typical 1,500 sf = 15 squares: $102.72+$103.98+$30.07 = $236.77 + GP 12.83% + $23.79 + CBSC $1 = $291.94.
  • Low 1,000 sf (10 squares) $258.01; high 1,800 sf still one additional 10-square block $291.94.

City of Fresno, not the county. Typical asphalt tear-off uses Other roofs (first 10 squares) plus $30.07 per additional 10 squares. Composition-no-tear-off is not used.

City of Fresno Master Fee Schedule (MFS Amendment #590), fees effective July 1, 2026 (FY27 CPI update) Retrieved Oct 7, 2026.

HVAC replacement

Fee basis: Flat fee.

Project value on this row: $7,500.

  • Typical 3-ton (36,000 BTU) like-for-like split: FAU $177.89 + simple cooling $111.50 + issuance $27.08 = $316.47 then GP/tech/CBSC → $381.86.

Low = FAU only $256.06. High = two complex mechanical items + cooling $582.58.

Stand-alone mechanical table. Typical is FAU <100 kBtu plus a simple cooling-unit line plus issuance. GP/tech/CBSC applied as building-permit surcharges listed on the same MFS.

City of Fresno Master Fee Schedule (MFS Amendment #590), fees effective July 1, 2026 (FY27 CPI update) Retrieved Oct 7, 2026.

Deck

Fee basis: Flat fee.

Project value on this row: low $8,000, typical $12,000, high $19,200.

Typical/low non-engineered: $238.02+$266.83 = $504.85 + GP/tech/CBSC = $594.41. High engineered: $670.22+$266.83 then surcharges = $1,082.06.

Typical-job spec 16×20 = 320 sf.

Non-engineered deck/patio line for typical/low. High uses the engineered deck/patio plan-check line. Documented 200/320/400 sf does not change these flats.

City of Fresno Master Fee Schedule (MFS Amendment #590), fees effective July 1, 2026 (FY27 CPI update) Retrieved Oct 7, 2026.

Kitchen remodel

Fee basis: Flat fee.

Project value on this row: low $15,000, typical $35,000, high $75,000.

First 500 sf: $227.99+$489.83 = $717.82 + GP $92.10 + tech $23.79 + CBSC $2 = $835.71.

  • Low $834.71 (CBSC $1); high $836.71 (CBSC $3).

Typical-job spec 200 sf (low 150 / high 400). Earlier figures used the $1 CBSC tier at every band.

Residential remodel first 500 sf line. 150/200/400 sf kitchens stay in the first 500 sf bracket. CBSC follows the MFS valuation tiers ($1 up to $25,000; $2 to $50,000; $3 to $75,000).

City of Fresno Master Fee Schedule (MFS Amendment #590), fees effective July 1, 2026 (FY27 CPI update) Retrieved Oct 7, 2026.

Questions about these permit fees

How much is a roof replacement permit in Fresno?

The typical permit fee is $291.94. The range is $258.01 to $291.94. Fee basis: Flat fee. Project value on this row: low $8,000, typical $12,000, high $22,000. Source: City of Fresno Master Fee Schedule (MFS Amendment #590), fees effective July 1, 2026 (FY27 CPI update). Retrieved Oct 7, 2026.

How much is an HVAC replacement permit in Fresno?

The typical permit fee is $381.86. The range is $256.06 to $582.58. Fee basis: Flat fee. Project value on this row: $7,500. Source: City of Fresno Master Fee Schedule (MFS Amendment #590), fees effective July 1, 2026 (FY27 CPI update). Retrieved Oct 7, 2026.

How much is a deck permit in Fresno?

The typical permit fee is $594.41. The range is $594.41 to $1,082. Fee basis: Flat fee. Project value on this row: low $8,000, typical $12,000, high $19,200. Source: City of Fresno Master Fee Schedule (MFS Amendment #590), fees effective July 1, 2026 (FY27 CPI update). Retrieved Oct 7, 2026.

How much is a kitchen remodel permit in Fresno?

The typical permit fee is $835.71. The range is $834.71 to $836.71. Fee basis: Flat fee. Project value on this row: low $15,000, typical $35,000, high $75,000. Source: City of Fresno Master Fee Schedule (MFS Amendment #590), fees effective July 1, 2026 (FY27 CPI update). Retrieved Oct 7, 2026.

Where do I apply for a building permit in Fresno?

Apply with City of Fresno Planning and Development Department, Building & Safety. The permit portal is https://www.fresno.gov/.

Permit fees in other California cities

Related pages