Roof replacement cost in Fort Worth, TX

Professional replacement for a typical home roof of about 1,300 to 1,800 sq ft of surface.

A typical roof replacement in Fort Worth, TX is about $8,867. The permit fee on this typical job is $0.

What we assumed

We price Roof replacement in Fort Worth, TX at 16 squares (1,600 sq ft of roof surface, not floor area).

When a published schedule is a valuation formula, the documented assumed valuation is $12,000 typical ($8,000 low, $22,000 high); not a city-assessed value. 2026 asphalt / mid-size roof band.

The official typical permit fee is $0. Full detail is in the calculation note on this page.

Questions about this estimate

How much does roof replacement cost in Fort Worth, TX?

Typical all-in is about $8,867. The official typical path permit fee is $0 (exempt).

Is a permit required for Roof replacement in Fort Worth, TX?

The typical path is listed as not requiring a permit for Roof replacement in Fort Worth, TX. The official typical fee is $0. §105.2 Building item 14 exempts roof repairs on Group R-3 including repair and replacement of the material above, but not including, the decking/lathing/sheathing.

What is included in this Roof replacement estimate for Fort Worth, TX?

The estimate is labor adjusted for local wages in Fort Worth, TX, plus materials at the national figure, at the typical size in the table above. The permit line is $0 on the typical path, so all-in is the job cost.

Why might the Fort Worth permit fee differ from this typical figure?

The typical path in Fort Worth, TX is listed as $0. §105.2 Building item 14 exempts roof repairs on Group R-3 including repair and replacement of the material above, but not including, the decking/lathing/sheathing. If your job is outside that exemption, the city may charge a different published line; we

How is the typical permit fee calculated for Roof replacement in Fort Worth, TX?

The official typical permit fee is $0. Full detail is in the calculation note on this page.

What project value is this Roof replacement permit fee based on in Fort Worth, TX?

Project values used only for the permit formula (not your total cost): low $8,000, typical $12,000, high $22,000.

Why is the typical permit fee $0 for Roof replacement in Fort Worth, TX?

Roof replacement fees on this row use the §105.2 Building item 14 exemption on the typical path.

How much does a roof replacement cost on a 2,000 sq ft home in Fort Worth?

Size in this model is roof surface. One roofing square is 100 sq ft of roof surface, and the typical job is 16 squares (1,600 sq ft of roof surface, not floor area). In this model, 2,000 sq ft means roof surface (20 squares). It is separate from the floor area of a home, and the model has no floor-area input. The cost-by-size table has no 2,000 sq ft row; its rows are 10 squares (1,000 sq ft of roof surface), 16 squares (1,600 sq ft of roof surface, not floor area), and 18 squares (1,800 sq ft of roof surface). Read as roof surface, 2,000 sq ft is 20 squares. The calculator already scales job cost by squares divided by 16, and 20 is inside the allowed range of 8 to 60, so these figures are that same scale, not a guess between table rows. At 20 squares in Fort Worth, TX the all-in is $6,809 low, $11,084 typical, and $53,242 high. Those all-in figures add the model's rounded permit for the bands on this row. The official fees are $0, $0, and $168.95. The model rounds each to the nearest dollar before adding it, so the all-in uses $0 on the low, $0 on the typical, and $169 on the high. The typical path is permit-exempt under §105.2 Building item 14, so the low and typical permits stay $0 and are not rescaled when the roof size changes. The high band is the sheathing/decking path and is also not rescaled by squares. The nearest table rows are 10 squares (1,000 sq ft of roof surface) at $5,542 typical and 18 squares (1,800 sq ft of roof surface) at $9,976 typical. Listed assumed valuations on this row are $8,000, $12,000, and $22,000, and they do not change those listed fees. Job cost is adjusted for local wages using the BLS construction-and-extraction mean of $27.03 per hour for the Dallas-Fort Worth-Arlington, TX metro (May 2025), labor wage multiplier 0.860, applied to the official 55% labor share. The permit line is not adjusted for local wages.

How much does roof replacement cost per square in Fort Worth?

Cost per square on this page is the all-in typical divided by the roof squares on that row. One square is 100 sq ft of roof surface, not floor area. The cost-by-size rows are 10 squares (1,000 sq ft of roof surface), 16 squares (1,600 sq ft of roof surface, not floor area), and 18 squares (1,800 sq ft of roof surface). The official typical permit fee is $0. The cost-by-size table shows that fee on each of those rows, because the typical path is permit-exempt and is not rescaled when the roof size changes. At 16 squares (1,600 sq ft of roof surface, not floor area) in Fort Worth, TX the all-in typical is $8,867, which is $554.19 per square after rounding to the nearest dollar. At 10 squares the all-in typical is $5,542, or $554.20 per square. At 18 squares the all-in typical is $9,976, or $554.22 per square. Those per-square figures are that division of the row. They are not a separate published rate.

Is $30,000 too much for a roof replacement in Fort Worth?

At the model's typical 16 squares (1,600 sq ft of roof surface, not floor area) in Fort Worth, TX, the all-in is $5,448 low, $8,867 typical, and $42,627 high. $30,000 is above that typical of $8,867. Published asphalt-shingle installed prices run $5,800 to $20,000, so $30,000 is above that band. The national high of $46,000 is the published broad high for steep or premium materials; adjusted for local wages for Fort Worth that is $42,627 at 16 squares, and $30,000 sits inside it. On the typical path the same scale first reaches $30,000 at 55 squares ($30,481 typical), which is far larger than a typical 13 to 18 square house roof. A like-for-like shingle reroof with no sheathing replacement stays on the §105.2 Building item 14 exempt path, so the official typical permit fee stays $0. If sheathing/decking is replaced, the official high is $168.95, and that high is not added on top of the typical.

Do I need a permit to replace my roof in Fort Worth?

On the typical path, no. Fort Worth Development Services Department is listed as not requiring a permit for a typical like-for-like Group R-3 shingle reroof with no sheathing replacement in Fort Worth, TX, and the official typical fee is $0. The cited source is Fort Worth Building Administrative Code §7-1 §105.2(14) and Tables 1A-1 / 1-B (Ord. 26-28781, eff. Oct 1, 2026), retrieved 2026-10-07. §105.2 Building item 14 exempts roof repairs on Group R-3 including repair and replacement of the material above, but not including, the decking/lathing/sheathing. If sheathing/decking is replaced, the exemption fails and the official high is Table 1A-1 1 trade $119 plus Table 1-B. $33.08 + $16.87 = $49.95. $119 + $49.95 = $168.95. That $168.95 high is not in the typical totals and is not added on top of the $0 typical. The official typical stays $0.

Why are the low, typical, and high roof permit fees $0, $0, and $168.95 in Fort Worth?

The low and typical are the §105.2 Building item 14 exempt path at $0. The high is the 1-trade remodel path if sheathing/decking is replaced. Listed assumed valuations are $8,000 low, $12,000 typical, and $22,000 high. The official typical project value is $12,000. Those valuations are unused on the typical exempt path and do not change the official $0, $0, and $168.95 fees. $33.08 + $16.87 = $49.95. High is Table 1A-1 1 trade $119 plus Table 1-B $49.95. $119 + $49.95 = $168.95. The official extra is that $168.95 line, and it is not in the typical totals. The $168.95 high is not added on top of the $0 typical. The model rounds those listed fees to $0, $0, and $169 before adding them to the all-in estimate.