Building Permit Fees in Greensboro, NC (2026)

City of Greensboro Development Services / Engineering and Inspections is the permit office for Greensboro, NC. The fee schedule year is 2024.

Updated Sep 1, 2026 ยท Fees checked Sep 1, 2026

Permit fees by job

Building permit fees in Greensboro, NC by job, 2026
JobPermit feeHow it is calculatedOfficial source
Roof replacement

Typical $0, no permit

The typical path does not require a permit.

Typical/low/high like-for-like covering reroof = $0 documented exemption. Documented 1,000/1,500/1,800 sf does not change this.

Full roof replacement calculation below

City of Greensboro residential construction permit-when page + N.C.G.S. 160D-1110

Retrieved Sep 1, 2026

HVAC replacement

Typical $85

Typical 3-ton (36,000 BTU) like-for-like split with 80,000 BTU furnace = $15 + $15 = $30, so the $85.00 minimum applies. Low/high same floor.

Full HVAC replacement calculation below

City of Greensboro mechanical permit fees (min $85; heating BTU table; heat pump/AC tonnage table)

Retrieved Sep 1, 2026

Deck

Typical $88

Range $85 to $112

Based on project value. Project value for the formula: low $8,000, typical $12,000, high $19,200.

Full deck calculation below

City of Greensboro building / mechanical permit fee schedules (Development Services)

Retrieved Sep 1, 2026

Kitchen remodel

Typical $157

Range $97 to $252

Typical $35,000 = $157.00. Low $15,000 = $97.00. High $75,000 = $252.00. Typical-job spec 200 sf does not change this valuation table.

Full kitchen remodel calculation below

City of Greensboro building / mechanical permit fee schedules (Development Services)

Retrieved Sep 1, 2026

How each fee is calculated

Roof replacement

Fee basis: Often exempt.

Project value on this row: low $8,000, typical $12,000, high $22,000.

Typical/low/high like-for-like covering reroof = $0 documented exemption. Documented 1,000/1,500/1,800 sf does not change this.

City of Greensboro, not High Point. Official city page: a building permit is required for structural work and for work over $40,000; listed <=$40,000 triggers do not include like-for-like roof covering replacement. N.C.G.S. 160D-1110(c)(5) exempts like-for-like roofing replacement. Assumed typical reroof $12,000 is under $40,000. Structural decking/framing work would need a permit at the alterations table.

City of Greensboro residential construction permit-when page + N.C.G.S. 160D-1110 Retrieved Sep 1, 2026.

Deck

Fee basis: Based on project value.

Project value for the formula: low $8,000, typical $12,000, high $19,200.

City of Greensboro building / mechanical permit fee schedules (Development Services; retrieved Sep 1, 2026). This row is City of Greensboro, not High Point and not Guilford County.

A permit is required for a typical deck. The fee follows the residential alterations and additions column, which prices construction cost.

The official fee band is $85.00 low, $88.00 typical, and $112.00 high ($85.00 / $88.00 / $112.00). The official typical project value is $12,000.

Listed construction costs are $8,000 low, $12,000 typical, and $19,200 high. The $85 floor covers construction cost through $11,000.

Above $11,000, add $3 per $1,000 of construction cost ($3 per additional $1,000), and round that cost up to the next $1,000 before counting the steps. Walk the typical job first.

  • Typical $12,000 is already an exact thousand and is $1,000 over $11,000, so the step count is 1. $85 + $3 x 1 ($12,000 - $11,000) = $85 + $3 = $88.00.

That $88.00 is the official typical fee.

  • Low $8,000 is still through $11,000, so it stays on the $85 floor and the official low fee is $85.00.

No $3 step is added at $8,000.

  • High $19,200 is not an exact thousand.

It rounds up to the next $1,000, which is $20,000. The amount above $11,000 is then $20,000 - $11,000 = $9,000, which is 9 steps. $85 + $3 x 9 ($20,000 - $11,000) = $85 + $27 = $112.00.

That $112.00 is the official high fee. The $88.00 typical is not added on top of the $85.00 low, and the $112.00 high is not added on top of the $88.00 typical.

In short, the band is the $85 floor, then $88 / $112 at the typical and high construction costs. A 16x20 deck is 320 square feet.

That typical-job size, and the 200 and 400 square foot comparison sizes, do not change this valuation table. Deck square footage drives the installed-job cost model.

It does not change the permit line; valuation does. The $10 state-licensed-contractor add-on is not stacked on these listed totals.

This note does not invent a fee beyond the official $85.00 / $88.00 / $112.00 totals.

City of Greensboro. Residential alterations and additions column. $85 through $11,000 then $3 per additional $1,000 (construction cost rounded up to the next $1,000). $10 state-licensed-contractor add-on is not stacked.

City of Greensboro building / mechanical permit fee schedules (Development Services) Retrieved Sep 1, 2026.

Kitchen remodel

Fee basis: Based on project value.

Project value for the formula: low $15,000, typical $35,000, high $75,000.

  • Typical $35,000 = $157.00.
  • Low $15,000 = $97.00.
  • High $75,000 = $252.00.

Typical-job spec 200 sf does not change this valuation table.

City of Greensboro. Interior kitchen remodel uses the residential alterations/additions column. Over $50,000: $202 + $2 per $1,000 over $50,000.

City of Greensboro building / mechanical permit fee schedules (Development Services) Retrieved Sep 1, 2026.

Questions about these permit fees

How much is a roof replacement permit in Greensboro?

The typical permit fee is $0, no permit. The typical path does not require a permit. Fee basis: Often exempt. Project value on this row: low $8,000, typical $12,000, high $22,000. Source: City of Greensboro residential construction permit-when page + N.C.G.S. 160D-1110. Retrieved Sep 1, 2026.

Do I need a permit for a roof replacement in Greensboro?

No. The typical path does not require a permit. Fee basis: Often exempt. City of Greensboro, not High Point. Official city page: a building permit is required for structural work and for work over $40,000; listed <=$40,000 triggers do not include like-for-like roof covering replacement. N.C.G.S. 160D-1110(c)(5) exempts like-for-like roofing replacement. Assumed typical reroof $12,000 is under $40,000. Structural decking/framing work would need a permit at the alterations table.

How much is an HVAC replacement permit in Greensboro?

The typical permit fee is $85. Fee basis: Flat fee. Project value on this row: $7,500. Source: City of Greensboro mechanical permit fees (min $85; heating BTU table; heat pump/AC tonnage table). Retrieved Sep 1, 2026.

How much is a deck permit in Greensboro?

The typical permit fee is $88. The range is $85 to $112. Fee basis: Based on project value. Project value for the formula: low $8,000, typical $12,000, high $19,200. Source: City of Greensboro building / mechanical permit fee schedules (Development Services). Retrieved Sep 1, 2026.

How much is a kitchen remodel permit in Greensboro?

The typical permit fee is $157. The range is $97 to $252. Fee basis: Based on project value. Project value for the formula: low $15,000, typical $35,000, high $75,000. Source: City of Greensboro building / mechanical permit fee schedules (Development Services). Retrieved Sep 1, 2026.

Where do I apply for a building permit in Greensboro?

Apply with City of Greensboro Development Services / Engineering and Inspections. The permit portal is https://www.greensboro-nc.gov/departments/engineering-inspections/developers-contractors/permits-fees-and-procedures.

Permit fees in other cities in the South

Related pages